Produse pentru magnet din (12)

DRILLSTAR fishing magnet is a valuable tool before diamond coring or drilling. Its strong magnetic field will retrieve all types of small steel objects from the bottom of the hole. It is available is a variety of sizes and shapes, to suit the most demanding fishing jobs. Two main designs are available : - Classic design, with a single magnet. - Modular design, using multiple small, high-strength magnets: this design enables a wide range of lifting forces and magnetic surface shapes, using the most powerful magnets available today. Mud ports can be added on the tool bottom or side to clean out the fish. Our magnets are available in two grades, depending on temperature rating : - Normal, up to 300 deg F (150 deg C). - High Temp, up to 570 deg F (300 deg C). Unlike traditional fishing magnets, DRILLSTAR Magnets are permanent and do not require any periodic re-magnetization. High-temp magnets are designed to lose very little force with temperature increase (3% per 100 deg C)

20 N integrated handle magnetic door holding High temperature and silicone cable Contactless coded electronic sensor Level of performance with AWAX controller: up to PL = e Safety category: up to 4 with an AWAX controller Time before dangerous failure: MTTFd = 100 years Max. activation distance: 3 mm, 1 mm hysteresis Holding Force: transmitter + receiver in contact = 20N Safety contacts/diagnostics: 2 x NO 0.8A/24V redundant and 1 x PNP 250mA Detection encoding: mono-code inviolable Reset: automatic Housing mount: 4 tamper-proof M4 screws (optional ref: BH4) Handle assembly: M8 screw (optional handle) Mounting position: 2 (double wall brackets) Material: INOX 316L mirror polished Electrical connection: 50cm Ultra-soft silicone cord with M12 connector. Water resistance: IP 69K Extreme temperature: -40°C to +125°C Marking: laser engraving with mechanical punching of the serial number for permanent traceability

1 amplificateur LH160 + 1 panneau de signalétique Walloop avec boucle magnétique + 1 adaptateur secteur 230VAC/12VDC 1.5A + 1 micro sur pied + 1 kit de montage. Le Geemarc LH160 est un amplificateur pour boucle à induction magnétique fixe. Très compact cet amplicateur de BIM ne mesure que 14 cm de longueur, alimentation 12VDC, il est conforme à la norme EN60118-4. Il est idéal pour les guichets, bureaux, véhicules... Amplificateur de boucle à induction magnétique pour guichets, bureaux, véhicules etc... Utilisation simple et rapide. 2 Entrées prise Jack 3,5 mm. Possibilité donc d’y connecter 2 microphones ou 1 microphone et 1 audio (Musique d’accueil, etc...). Réglage de la tonalité. Réglage du niveau des entrées. Réglage du courant de boucle. Indicateur visuel du niveau des entrées. Indicateur visuel du courant de boucle. Possibilité de connecter une boucle externe couvrant une superficie de 10 à 50m². Montage mural possible. Dimensions : 140 x 70 x 40 mm. Poids : 320g. Le...

High temperature, magnetic door holding, integrated 20N Contactless coded electronic sensor Total safety management with an AWAX controller Level of performance with AWAX controller: up to PL = e Safety category: up to 4 with an AWAX controller Time before dangerous failure: MTTFd = 100 years Max. activation distance: 3 mm, 1 mm hysteresis Holding Force: transmitter + receiver in contact = 20N Safety contacts/diagnostics: 2 x NO 0.8A/24V redundant and 1 x PNP 250mA Detection encoding: mono-code inviolable Reset: automatic Attachment: 4 tamper-proof M4 screws (optional ref: BH4) Mounting position: 2 (double wall brackets) Material: INOX 316L mirror polished Electrical connection: 50cm Ultra-soft silicone cord with M12 connector. Water resistance: IP 69K Extreme temperature: -40°C to +125°C Marking: laser engraving with mechanical punching of the serial number for permanent traceability

40N integrated stainless steel magnetic door holding Contactless encoded electronic sensor with relay Category 3 total safety management without an external controller Level of performance without an external controller: PL = d Level of performance with AWAX controller: up to PL = e Safety category without an external controller: 3 Safety Integrity Level: SIL 2 Cycle before dangerous failure: B10d = 2,000,000 at 2A Max. activation distance: 4 mm, 2 mm hysteresis Holding Force: transmitter + receiver in contact = 40N Safety contacts/diagnostics: 2 x NO 2A/48V redundant / 1 x PNP 250mA encoding detection: single inviolable code Reset: automatic Attachment: 4 tamper-proof M4 screws (optional ref: BH4) Mounting position: 1 Material: INOX 316L mirror polished Electrical connection: 3, 6, 12m cable Water resistance: IP 67/68 Temperature: -25°C to +60°C Marking: INOX316L laser engraving with mechanical punching of the serial number for permanent traceability Certification: TÜV Rheinland 01/205/5238/12 License Test Mark 968/EL 214.01/12

40N integrated stainless steel magnetic door holding Contactless coded electronic sensor Total safety management with an AWAX controller Level of performance with AWAX controller: up to PL = e Safety category: up to 4 with an AWAX controller Time before dangerous failure: MTTFd = 360 years Max. activation distance: 3 mm, 2 mm hysteresis Holding Force: transmitter + receiver in contact = 40N Safety contacts/diagnostics: 2 x NO 0.8A max / 48V redundant and 1 x PNP 250mA Detection encoding: mono-code inviolable Reset: automatic Attachment: 4 tamper-proof M4 screws (optional ref: BH4) Mounting position: 1 Material: INOX 316L mirror polished Electrical Connection: 3, 6, 12m cable or 50cm cord PUR M12 (ref. + MKT) Water resistance: IP 67/68 (EPINUS-4K-MKT) and IP 69K (EPINUS-4K/SES) Temperature: -25°C to +70°C. Marking: laser engraving with mechanical punching of the serial number for permanent traceability

Kit de fixation aimant pour miroir hémisphérique 360°.

Fixation murale aimantée pour sangle de poteaux de guidage série RECO/RS et pour enrouleurs à sangle RW/REWO. Lot de 6 aimants.

Ce système de fixation est une alternative à la fixation classique par vis de votre détecteur de fumée et ne nécessite ni perçage ni outil. Caractéristiques principales de cette fixation adhésive et magnétique pour détecteur de fumée : - Compatible avec un grand nombre de détecteurs de fumée qui sont sur notre site : ORIGINES, ORIGINES LITHIUM, CONNECT RF LITHIUM, détecteurs Ei, etc... - Compatible pour tout détecteur faisant plus de 8 cm de diamètre - Fixation collante développée pour une fixation durable - Ne convient pas sur tapisserie vinyle, polystyrène, surfaces anti adhérentes et surfaces couvertes de silicone ou de téflon. Cette fixation adhésive est compatible avec la norme CE EN 14604, par contre la norme NF ne prévoit pas ce type de fixation.

Patère murale aimantée, se fixe sur tout support métallique. Support ABS, charge maximal 12 kg. Coloris noir/blanc. Dimensions 80 x 100 mm.

Kit de fixation aimant pour miroir hémisphérique 180°.

Kit de fixation aimant pour miroir hémisphérique 90° Plexi+.